Kenmore 790.99019 - Manual (Page 18)

PRESS DISPLAY
Consumer Defined Control Features
FEATURE OVERVIEW
• Oven Lockout
• Temperature Display
Note: The Consumer Defined Control features are adjustments to the
control that will not affect cooking results. These include the Oven
Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The (D pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Warmer Drawer and ESEC Control from being turned on. It does not disable the clock, Kitchen Timer,
Warmer Zone or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature:
1. Press and hold
CD
for three seconds (Fig. 1).
2. After 3 seconds the lock icon light { Q ) will appear, a beep will
sound and "DOOR LOCKED" wiil flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
To reactivate normai oven operation:
1. Press and hold for three seconds. A beep will sound.
The "DOOR LOCKED" wiil continue to flash until the oven door
has completely unlocked and the lock icon light ( Q ) will clear
(See Fig. 2).
2. The range is again fully operational. Figure 2
CD
for 3 seconds
for 3 seconds
Setting Temperature Display — Fahrenheit or Celsius
The BROIL ( broi ^ and CLEAN pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be programmed to display
temperatures In Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS PRESS
To change display from Fahrenheit to Ceisius or
Celsius to Fahrenheit:
Figure 1
DISPLAY
1. To tell if the display Is set for Fahrenheit or Ceisius press
(Fig. 3) and hoid for 7 seconds. A beep wiil then sound.
If "F" appears, the display is set to show temperatures in
Fahrenheit (Fig. 4). If "C" appears, the display is set to show
temperatures in Ceisius (Fig. 5).
2. Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3. Press to accept the change or press to reject the
change.
B roil ) for /seconds
[ S T ^ ) or
18