Warning, Wand-telescoping, Power-mate – Kenmore 11 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly Is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WAND-TELESCOPING
The wand length
is adjustable
and requires no
assembly. To
adjust, simply
push down on
the wand adjust
button and slide
the upper wand
to the desired
height.
Wand
Langth
Adjust
Button
-Keep
Hand
Above
This
Tab
Wand
Swivel
The swivel,
located on the
Power-Mate*,
allows you to
turn the handle
to the left side to
reach farther
under low furni
ture.
When adjusting the wand length you may
have to hold the Power-Mate® with your hand
or foot.
POWER-MATE
Insert wand into Power-Mate® until the wand
button snaps into place.
Handle ■
Handle
Button-
Handle
Quick
Release
Button
j“T
Telescoping
Wand
j .
Wand Length
;
Adjust Button
Wand
__ I
Button