beautypg.com

Power-mate* storage, Thermal protector, Electronic bag/hose check indicator – Kenmore 11 User Manual

Page 12: Stair grip, Power>mate jr.* storage

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

POWER-MATE* STORAGE

The lower wand

has a “U” shaped
flange in the area
where the power
cord attaches. The

base has a “U"

shaped slot near
the front.

The flange allows
the wands and Power-Mate®to be stored

with the canister to conserve storage space.

The canister must be stored on end for this

feature to be used.

To attach the Power-Mate®, it must be in the
flat position as shown in the illustration. Use
the handle release pedal to place it in this
position.

The wand will slip out of the slot as it is lifted
up for use and will slide into the slot as it is
lowered for storage.

THERMAL PROTECTOR

This vacuum has a thermal protector which
automatically trips to protect the vacuum
from overheating. The thermal protector
turns the motor off automatically to allow the
motor to coot in order to prevent possible
damage to the vacuum.

To reset: Turn off and unplug the vacuum
from the outlet to allow the vacuum to cool.
Check for and remove any clogs. Also

check and replace any clogged filters.
Wait approximately 50 minutes and plug

the vacuum in and turn back on to see if
the thermal protector has reset. In some

cases, the unit may suddenly restart. DO
NOT leave unattended.

ELECTRONIC BAG/HOSE

CHECK INDICATOR

Electronic
Bag/Hose

The light comes
on whenever
the airflow

becomes
blocked, dust

bag needs

changing or

canister safety
filter needs
cleaning.

NOTE: The light may come on when using

certain attachments, due to reduced airflow
through attachment.

Refer to TROUBLESHOOTING.

STAIR GRIP

During normal operation while the vacuum is
in the horizontal position, the caster wheel
rotates freely 360“.

The Stair Grip
feature allows
the caster
wheel to lock in

position when

the unit is

rotated 25“

from horizontal

Into a vertical
position in

order for the
vacuum to rest on stairs.

12

This manual is related to the following products: