Kenmore 790.4906 - Manual (Page 12)

Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius
The BROIL ( br ^ and FLEX CLEAN (gj^ pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
( br ÒÌ^ (figure 1 ) and hold for 7 seconds; Wait untili "F" or "C"
appears. If "F" appears, the display is set to show
temperatures in Fahrenheit (Figure 2). If "C" appears, the
display is set to show temperatures in Celsius (Figure 3).
2. Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
(BRC^
for 7s6conds
Figure 1
Figure 2
3. Press QTARy or and wait 5 seconds to accept the change.
or
Figure 3
12