Kenmore 790.4906 - Manual (Page 11)

Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature Display and Silent Control Operation features
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
1. Press and hold tor 3 seconds (Figure 1).
2. After 3 seconds "Off" will appear in the display and a beep will
sound. Once the oven door is locked "LOCK" will appear in the
display (Figure 1).
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep will sound. "Off" will
disappear from the display and "LOCK" will stay until the oven
door has completely unlocked (Figure 2).
2. The wall oven is again fully operational (Figure 3).
PRESS
for 3
seconds
(Qfor3
seconds
DISPLAY
Figure 1
Figure 2
Figure 3
; .
iti
.w
2: Setting Silent Control Operation
The DELAY START and FLEX CLEAN pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
hold (|i^ for 7 seconds. "On bEEp On" will appear in the
display (Figure 4).
2. Press to switch between normal sound operation and
silent operation mode. The display will show either "On bEEp On"
(Figure 4) or "Off bEEp Off" (Figure 5).
If "On bEEp On" appears (Figure 4), the control will operate with
normal sounds and beeps. If "Off bEEp Off" appears (Figure 5),
the control is in the silent operation mode.
3. Press QiARy or wait 5 seconds to accept the change.
Figure 4
for 7 seconds
Figure 5
11