Canister, Hood, Hose – Kenmore 1T6.29429 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CANISTER

1. open the canister hood.

2. Check to see that the dust bag is proper
ly installed. See BAG CHANGING for
instructions.

Check to see that the motor safety filter is

properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions

HOOD

It is normal for the canister hood to come off

when opened further than needed. Line up
the hinges, insert them, and dose the hood
to replace it.

HOSE

1. Line up the

hose latch tab
and notch in

canister hood
and insert hose

into canister until

it snaps in place.

To remove: lift

hose latch tab
upward and pull
up on hose.

2. insert
handle into

wand until
lock button
snaps in
place. Be
sure hose

is not

twisted.

To remove:

press han-

ip jrplppcp

button and
pu!l up on

handle.

To store: Disconnect hose from wands and

canister to prevent stress on hose during

olnrppp ^iAfP hAQP lA p I

aapp

position so the hose covering is not
stressed.

Cover

Canister
Performance
indicator Light

(Some

Modefej

Performance

Indicator

(Some Modeis)

Dust Bag