Brush servicing, Warning, Electrical shock or personal injury hazard – Kenmore 1T6.29429 User Manual

Page 16: To check brushes, To replace brush dowel, Brush assembly

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BRUSH SERVICING

WARNING

Electrical Shock Or Personal Injury
Hazard

Disconnect electrical supply before
servicing or cleaning the unit,
Failure to do so couid result In elec

trical shock or personal injury from
cleaner suddenly starting.

TO CHECK BRUSHES:

When brushes
are worn to the

level of the base

support bars,
replace the
brush dowel

TO REPLACE BRUSH DOWEL;

1. Remove POWER-MATE™ cover, belt and

brush assembly See “To remove belt" in
BELT CHANGING AND BRUSH

CLEANING,.

2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces

from ends of brush assembly,

3. Reassemble brush assembly, To line up

screw holes in dowel, sprocket and end
brush, be sure the brush portion of end

brush lines up with brushes on brush dowel.

4. Replace belt, brush assembly POWER

MATE™ cover, light bulb and light cover. See

“To replace belt" in BELT CHANGING AND

BRUSH CLEANING,

BRUSH ASSEMBLY

Brush

Sprocket