beautypg.com

Setting oven controls (confd), To set the minute timer, To set or change the temperature for baking – Kenmore 790.4626 User Manual

Page 11: Setting the oven controls -14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Setting Oven Controls (confd)

Note: The time of day must first be set in order to operate the oven.

To Set the Minute Timer:

1. Press

2. Press the to increase the time in one minute increments. Press and hold the yy to increase the time in 10 minute

increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the v pad first, the timer will advance to 11 hours and 59 minutes.

3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in

seconds.

4. When the set time has run out, the timer will sound a 3 seconds beep. Then 0:00 will appear in the display until (s)

is pressed.

Note: While the minute timer is counting down, the will flash. The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone
or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will
be shown in the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

.

While the timer is active and shows in the display, press and hold the yy or v' pad to increase or decrease the time. ¡55

r;

To Cancel the Minute Timer before the set time has run out: Press (S).

: i

To Set or Change the Temperature for Baking

The oven can be programmed to bake at any temperature from 170°F to 500“F.

To Set the Controls for Baking:

1. Press "------------------ " appears in the display.

2. Within 5 seconds, press the yy or

yy.

The display will show "350°". By pressing and holding the

yy

or yy, the

temperature can then be adjusted in 5“F increments.

3. When the yy oryy is released, the oven will begin heating to the selected temperature. When the oven temperature

reaches the desired baking temperature, the control will beep one (1) time.

4. To cancel the baking function, press i

To Change the Oven Temperature after Baking has Started:

1. Press and make sure the bake temperature is displayed.

2.

Press the

yy

or

yy

to increase or decrease the set temperature.

11