Oven control functions, To set the clock, Changing the temperature display mode – Kenmore 790.4626 User Manual

Page 10: Oven, Setting, Controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Oven Control Functions

READTHE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become

familiar with the various functions of the oven as described below.

BAKE PAD—Used to

(

select the bake
function.

■■Sake

Select BROIL PAD—
Used to select the

Btoif

variable broil function.

TIMER SET/OFF PAD— Used to
set or cancel the minute timer.
The minute timer does not start
or stop cooking.

UP and DOWN ARROW

PADS—Used along with

the function pads to select
oven temperature, time of
day and minute timer.

CLOCK SET PAD—
Used to set the time of
day.

STOP/CLEAR — Used to clear any
function previously entered except the
time of day and minute timer. Push STOP/
CLEAR to stop cooking.

Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it operates.

Setting

Oven

Controls

Note: The time of day must first be set in order to operate the oven.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash

1. Press

2. Within 5 seconds, press and hold the yv or v” until the correct time of day appears in the display.

Changing the Temperature Display Mode

The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven temperatures.

Note: Oven cooking temperatures may be set from 170°F to 500°F (76°C to 260°C).

To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing the
Temperature Display Mode):

1. Press & hold the key pad for 6-8 seconds until

appears in the display. Note: At this time the display will

show the current Temperature Display Mode whether set for

C .

2. Press the /\ key pad once to choose the (Fahrenheit) °F mode; or press the

key pad once to choose the

(Celsius) °C mode.

3. After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps once.

To complete the change skip step 4 below, OR;

4. If at any time during the process of changing the Temperature Display Mode

) you decide the change is not

desired, press the key pad before the oven control beeps once to cancel the process.

5. The display will then return to the time of day with any temperature display mode change you may have requested.