Assembly instructions, Warning, Wands – Kenmore 116.23812300 User Manual
Page 6: Power-mate, Assembly instructions -7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
A
WARNING
Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly is complete. Failure
to do so could result in electrical
shock or injury.
Button
Before assembling vacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List. Use this list to verify that
you have received all the components of
your new Kenmore vacuum.
WANDS
Slide wands
together until
wand button
snaps into
place. Turn
wand button to
the slotted area
of the wand
swivel.
The swivel
allows you to
turn the handle
to the left side to
reach farther
under low furni
ture.
Power-Mate®
1. Insert wands into Power-Mate*’ until the
wand buttons snap
into place.
2. Connect Power
Mate* plug and
cord as shown. DO
NOT force. Raised
area of plug must
be toward hand.
3. Secure cord into
the cord holder on
the wand swivel.
To remove: Step on wand quick release
pedal, then pull up on wands.
Upper
Wand-
■ Wand
Button
Wand
Swivel
Lower
Wand
Wand
Button
Wand Quick
Release Pedal