Suggested pile height settings, Attachments, Caution – Kenmore 116.23812300 User Manual
Page 10: Attachments on handle, Note, Attachments on wands, Suggested pile height settings attachments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SUGGESTED PILE HEIGHT SETTINGS
For best deep down cleaning, use the XLO
setting. However, you may need to raise the
height to make some jobs easier, such as
scatter rugs and some deep pile carpets,
and to prevent the vacuum cleaner from
shutting off. Suggested settings are:
HI - Shag, deep pile, or scatter rugs.
MED - Medium to deep pile.
LO - Low to medium pile.
XLO - Most carpets and bare floors.
ATTACHMENTS
A
CAUTION
DO NOT attach or remove handle or
wands while cleaner is ON. This
could cause sparking and damage
the electrical contacts.
Lock
Button
ATTACHMENTS ON HANDLE
NOTE: if the
Power-Mate*' is
attached, turn
cleaner off
before remov
ing handle
from wands.
1. Press lock
button, then
pull to remove
handle from
wand.
Upper
leaner
If your model has the optional feature of a
handle release, press it in a similar fashion.
2. Slide attachments
firmly on handle as
needed. See ATTACH
MENT USE.
Dast/ng
Brush
NOTE:
To assemble
dusting brush
insert the fabric
brush into the
dusting brush
nozzle and
press into place
Fabric
Brush
To remove, press latch and lift out.
ATTACHMENTS ON WANDS
1.To
remove
wands from
Power
Mate*', lock
wands in
straight-up
position.
3. Put attach
ments on
wands as
needed. See
ATTACHMENT
USE.
2. Press wand quick
release pedal with foot
and pull the wands
straight up and out of
Power-Mate*.
The Power-Mate® plug
and cord do not have
to be removed to use
attachments on the
wands.
10