Exhaust filter changing, Warning, Exhaust filter – Kenmore 116.23812300 User Manual
Page 15: Power-mate'® care, Electrical shock or personal injury hazard, Power-mate® care
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EXHAUST FILTER CHANGING
A
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust hiter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the vacu
um and lay
aside.
Exhaust
Filter
3. Replace the
exhaust filter
cartridge.
Place the new
filter into the
vacuum with
the grey edge
facing
towards the
vacuum.
2. Pull the exhaust
filter up and out
from the rear of
the vacuum.
Exhaust
Filter
Tabs
4
. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum and
rotate into place
until it snaps
closed.
POWER-MATE'® CARE
Always follow ail safety precautions when
cleaning and servicing the Power-Mate®.
A
WARNING
Electrical Shock Or Personal injury
Hazard
Disconnect electrical supply before
servicing or cleaning tiie unit.
Failure to do so could result in elec*
trical shock or personal injury from
cleaner suddenly starting.
15