Kenmore 116.34924 - Manual (Page 10)

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush. Snap into appropriate storage location.
Remove crevice tool from the wand by twist­
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning the wand lock­
ing ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com­
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the nozzle body from which it was removed.
Press firmly to assure connection.
A
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage or personal injury
could result.
EXTENSION HOSE
Some models include an extra hose which
connects to the stretch hose on the vacuum
cleaner for a longer cleaning reach.
Connect extension hose to stretch hose by
pressing together. Make sure electrical
connections are pressed firmly together.
To disconnect press reiease button on
hose and pull apart.
A
CAUTION
When using the stretch hose or with
the extension hose attached, the
vacuum cieaner should be on a solid
surface on the same level or below
the level of the user’s feet DO NOT
use the hoses when the vacuum
cleaner is above the level of the
user’s feet
POWER-MATE JR.®
When attaching Power-Mate Jr.® to
extension hose align electrical connec­
tions and press together. Power-Mate
Jr.® cannot be used with extension wand.
Power-Mate Jr.®
Release Button
Electrical
Connectors
To disconnect press release button on
hose and pull apart.
A
CAUTION
DO NOT connect Power-Mate Jr.® to
electrified hose with power to
vacuum cleaner ON. ALWAYS unplug
before connecting powered
attachments.
A
CAUTION
DO NOT leave the Power-Mate Jr.®
running in one spot for any length of
time. Damage to carpet may occur.
10