Warning, Ing and ajirrugr ci^ind •'.f, To remove belt – Kenmore 116.23637C User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Always follow ail safety precautions when
cleaning and servicing the Power-Mate®,

WARNING

Electrical Shock Or Personal Injury
Hazard

Disconnect electrical supply before

servicing or cleaning the unit. Failure

to do so could result in electrical shock

or personal injury from cleaner sud
denly starting.

|#>

ing

AjirrUgR ci^iNd • ' . f • ; ;

Disconnect cleaner from electrical outlet.

Check and remove hair, string and lint build

up frequently in the Power-Mate® brush and

brush support areas. If build-up becomes
excessive, disconnect Power-Mate® from

wand and follow the steps below.

TO REMOVE BELT

3. Turn Power

Mate® right side
up. Press handle
release pedal and

lower the swivel.

Lift rear latches up.

1. Turn Power
Mate® upside

down.

2. Unscrew the
two (2) Power

Mate® cover

screws.

4. To remove cover,
grasp the sides and puli
out.

5. Depress tabs
on rear of
agitator cover

and rotate

fon/vard to

release from

the Power

Mate® base.

Agitator

Cover

6. Lift agitator
assembly out

and remove

worn belt.

End Cap

7. Check and clean end cap areas.