Kenmore 116.23637C User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Always empty the dust bin when dirt level
reaches the “MAX FILL* line.
TO REMOVE DUST BIN:
Press down on
the dust bin
release tab locat
ed above the
handle of the dust
bin.
dust bin is removed,
rotate cleaning knob
on top of dust bin at
least two complete
revolutions to clean
filter and maintain
cleaning perfor
mance.
Pull the handle
and lift dust bin
out of the vacu
um cleaner.
Every time the
Cleaning
Remove any
clogs that
might be
located in
the dust bin
port or the
secondary
filter.
TO EMPTY DUST BIN:
While holding dust bin
over a trash can,
remove iid from dust
bin by lifting off.
Pour dust bin
contents into a
trash container.
TO CLEAN FILTER
See To Clean Filter” under FILTER
CHANGING/CLEANING.
TO REPLACE DUST BIN
Replace dust bin
iid assembly by
placing back on
dust bin with the
alignment rib on
the iid aligned
with the edge on
the dust bin
Alignment
rib
Place dust bin
back into vacuum
cleaner by insert
ing until the dust
bin release but
ton locks dust
bin securely In
place.
13