Kenmore 116.23637C - Manual (Page 10)

A
CAUTION
DO NOT attach or remove handle or
wands while cleaner is ON. This could
cause sparking and damage the elec­
trical contacts.
ATTACHMENTS ON HANDLE
Handle
Lock
Button
Upper
Wand
NOTE: If the
Power-Mate® is
attached, turn
cleaner off ^
before removing
handle from
wands.
1. Press lock
button, then pull
to remove han­
dle from wand.
If your model has the optional feature of a
handle release, press it
in similarly.
2. Slide attachments
firmly on handle as need­
ed. See chart below.
ATTACHMENTS ON WANDS
1. To remove
wands from Power­
Mate®, lock wands
in straight-up posi­
tion.
2. Press wa'nd
release pedal
with foot and
pull the wands
straight up out of
Power-Mate®.
The Power-Mate® plug and cord do not have
to be removed to use attachments on the
wands.
3. Put attachments on
wands as needed. See
chart below.
CLEANING AREA
ATTACHMENT
Furniture*
Between
Cushions*Drapes* Stairs
Bare
Floors
Carpeted
Roors/Rugs Walts
Combination Brush X X X X
Crevice Tool X X
Roor Brush X X X
Power-Mate* X** X
Handl-MateJr*
(Some Models)™ X X
X X
'Always clean attachments before using on fabrics. '' Power-Mate* switch should be in FLCX5R position.
Handi-Mate Jr.* and Power-Mate Jr.* attachnnent instructions are included with the products.
NOTE: When separating wands, depress lock button completely before pulling wands apart,
wand lock button is difficult to depress, push the two wands more tightly together to line up
the lock button with the hole. Depress lock button and then pull wands apart.
If
10