Grounding instructions – Kenmore 790.754 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapteroran extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
electrician.
See the INSTALLATION INSTRUCTIONS packaged with this range
for complete installation and grounding instructions.
A WARNING
I This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly intoa properly grounded receptacle. DO NOT cut or remove the
grounding prong from this plug.
A WARNING
I Personal injury or death from electrical shock may
occur if the range is not installed by a qualified installer or
electrician.
Grounding type
wail receptacle
Do not, under any
circumstances,
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
A WARNING
(Avoid fire hazard or electrical shock.
DO NOT use an adapter plug, an extension cord, or
removegrounding prong from electrical powercord.
Failure to follow this warning can cause serious
injury, fire or death.
Conversion to Liquefied Petroleum Gas (or L. P. Gas)
This natural gas range is designed to allow for conversion
to Liquefied Petroleum (L. P.) Gas.
Only a qualified service agent should perform the L. P.
conversion. Call 1-800-4-MY-HOME® if you wish to have
Sears Service perform the conversion. An L. P.
Conversion Kit is provided with this range and is located on
the main back of the range. The kit contains installation
instructions which must be read before and followed
carefully when installing the kit.
A WARNING
¡To avoid serious injury, any additions,
changes or conversions required in order forthis appliance
to satisfactorily meet the application needs must be made
by a qualified service agent.
rn
L:
^
.