Setting the warm & hold feature (cont’d), Oven baking information, Baking problems and solutions – Kenmore 790.754 User Manual
Page 16: Baking problems, Causes, Corrections, Cakes too dark on top or bottom, Cakes not done in the center, Cakes not level, Setting oven controls (cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Warm & Hold Feature (Cont’d)
To set Keep Warm to turn ON automatically:
1. Arrange the interior oven racks and place food in the oven. Set the oven properly for Timed Bake or Delayed Timed
Bake (see page 19).
2. Press
"------ " will appear in the display and the Keep Warm indicator light above the pad will turn ON.
3. Press yv or -V to start. Keep Warm is set to turn ON automatically after Timed Bake or Delayed Timed Bake has
finished.
Setting Oven Controls (cont’d)
To turn Warm & Hold feature OFF at any time press i
OFF.
I or nfoi“
7
' The Keep Warm indicator light above the pad will turn
Oven Baking Information
For best results, preheat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned
appliance. Referto “Adjusting the Oven Temperature” section.
Baking problems and solutions
Baking Problems
Causes
Corrections
Cookies and
biscuits burn on
the bottom.
Cookies and biscuits put into
the oven before the preheating
time is completed.
Oven rack overcrowded.
Dark pan absorbs heat too fast.
Allow oven to preheat to the selected temperature
before placing food in oven.
Choose pan sizes that will permit 2" to 4" (5.1 cm to
10.2 cm) of air space on all sides when placed in the
oven.
Use a medium-weight aluminum baking sheet.
Cakes too dark on
top or bottom.
Cakes put into the oven before
preheating time is completed.
Oven rack position too high or
low.
Oven too hot.
Allow oven to preheat to the selected temperature
before placing food in the oven.
Use proper rack position for baking needs.
Set oven temperature 25°F/12“C lower than
recommended.
Cakes not done in
the center.
• Oven too hot.
» Incorrect pan size.
• Pan not centered in the oven.
Set oven temperature 25°F/12°C lower than
recommended.
Use pan size suggested in recipe.
Use proper rack position and place pan so there is 2"
to 4" (5.1 cm to 10.2 cm) of space on all sides of pan.
Cakes not level.
Range not level.
• Pan too close to oven wall or
rack overcrowded.
• Pan warped.
Place marked glass measuring cup filled with water
on the center of the oven rack. If water level is
uneven, refer to the installation instructions for
leveling the appliance.
Be sure to allow 2" to 4" (5.1 cm to 10.2 cm) of
clearance on all sides of each pan in the oven.
Do not use pans that are dented or warped.
Foods not done
when cooking time
is up.
Oven too cool.
Oven overcrowded.
Oven door opened too
frequently.
Set oven temperature 25°F /12°C higher than
suggested and bake for the recommended time.
Be sure to remove all pans from the oven except the
ones to be used for baking.
Open oven door only after shortest recommended
baking time.
16