For a silent control panel, Temperature conversion (fahrenheit / celsius), To operate the oven light – Kenmore 790.754 User Manual
Page 13: Control pad features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Control Pad Features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described beiow. Detailed instructions for each feature
and function follow later in this Use & Care Guide.
Note: The oven function will not work if the time of day clock is not set.
Oven Interior Light Pad-
Used to turn oven interior
light ON and OFF.
Feature indicator
lights- These light
show which feature is
In use.
Cook Time Pad- Used
to enter the iength of
the baking time.
Used to set the
time of day.
Up and Down arrow pads- Used
along with the function pads to
select oven temperature, cooking
time, start time (when programming
y,
clean time and minute timer.
Select Clean Pad-
Used to select the
self-cleaning cycle.
Kitchen Timer
Pad- Used to set
or cancel the
minute timer. The
minute timer does-
not start or stop
cooking.
Delay Start Pad- Used
to set the desired start
time for baking. Can be
used with OVEN COOK
TIME to program a
delayed bake cycle.
Add 1 Minute Pad- Used to add 1
minute to the Timer Countdown. This
feature works with the Kitchen Timer
only and does not affect any cook time
or start time functions.
Bake Pad- Used to
enter the normal baking
mode temperature.
Broil Pad- Used to
select the variable broil
function.
-.Warm & Hold Pad-
Used to set the Keep
Warm feature.
Slow Cook—
Used to set the Slow
Cook feature.
Oven, Preheat, Door Locked & Cooktop Locked
lights- The "oven" light indicates that the oven is
functioning. The "Preheat" light will glow when the
oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "Door Locked" light will flash until
the door locks when the self-clean cycle is in use. It
glows constantly after the door locks.
Stop Pad- Used to clear
any function previously
entered except the time of
day and minute timer.
Push Clear pad to stop
cooking. Also used to
activate the Oven Lock
feature.
Recipe Recall-
Used to set the
Recipe Recall
feature.
rn
:L;
^
.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent
operation.
To tell if your oven is set for normal or silent operation push and hold
for? seconds. or "SP" (speaker) appears in
the display. Within 5 seconds, press yv or to switch between normal sound operation and silent operation mode. The display
will show either
or "SP". Waits seconds to return to normal operating mode. Note: If "SP" appears, the control will operate
with normal sounds and beeps. If appears, the control is in the silent operation mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed forany temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to
°F
(control should not be in a Bake or Clean mode):
I (
br
ÒÌ^
Press yv or >✓ " to change °F to °C or “C to °F.
3. Wait 5 seconds or press (^p) to accept the changes.
1. Press and hold
(B
roii
^
for 7 seconds until “F or “C appears in the display.
2
.
To Operate the Oven Light
The interior oven light will automatically turn ON when the oven door is opened. Press
to turn the interior light ON
and OFF whenever the door is closed. The interior oven light is located at the upper left rear wall of the oven interior and is
covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To change
the interior oven light, see changing the Oven Light in the General Care & Cleaning section in this Use and Care Guide.
13