Kenmore 665.75022 - Manual (Page 18)

Prepare Oven:
■ Remove the broiler pan, grid, cookware and bakeware and,
on some models, the temperature probe from the oven.
■ Remove any foil from the oven because it may burn or melt,
damaging the oven.
■ Remove oven racks to keep them shiny and easy to slide.
See “General Cleaning" for more information.
■ Hand clean inside door edge and the 1 '/2
in. (3.8 cm) area
around the inside oven cavity frame, being careful not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc. enter slots on door frame. Use a damp cloth to clean this
area.
■ Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
Prepare Cooktop and Storage Drawer
■ Remove plastic items from the cooktop because they may
melt.
■ Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The LOGI-CLEAN™ Self-Cleaning cycle is a “one-touch” step
that uses very high temperatures, burning soil to a powdery ash.
“SEnS" setting will automatically determine the length of cleaning
time. Maximum clean time is 4 hours 30 minutes and minimum is
2 hours.
The oven will automatically shut off once it is clean. The door will
not unlock until the oven cools.
The soil level can be manually set to light, average or heavy soil
levels by continuously pressing LOGI-CLEAN.
To Set:
■ Press twice for light soils, and “SoilL" will appear on the
display.
■ Press three times for average soils, and “SoilA” will appear
on the display.
■ Press four times for heavy soils, and “SoilH” will appear on
the display.
Once the oven has completely cooled, remove ash with a damp
cloth.
The oven light wiil not work during the Self-Cleaning cycle.
To Self-Clean:
Before self-cleaning, make sure the door is closed completely or
it will not lock and the cycle will not begin.
1. Press LOGI-CLEAN.
2. Press START/ENTER.
The oven door will lock in 6 seconds and “LOCKED", the start
time and stop time will appear on the display. The door will
not unlock until the oven cools. The cycle time includes a 30
minute cool down time
When the cycle is complete and the oven cools, “End” will
appear on the display and “LOCKED” will disappear.
3. Press any pad to remove “End” or open the oven door.
4. Close door.
The time of day will appear on the display.
To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See “Clock” section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.
1. Press LOGI-CLEAN.
2. Press DELAY START.
Press the HOUR/MIN “up” or “down” arrow pad to set time of
day to start the Self-Cleaning cycle.
3. Press START/ENTER.
The start time is automatically calculated and displayed. The
door will automatically lock and “LOCKED”, “DELAY” and the
stop time will also appear on the display.
When the start time is reached, the oven will automatically
turn on.
When the cycle is complete and the oven cools, “End” will
appear on the display and “LOCKED” wiil disappear.
4. Press any pad to remove “End” or open the oven door.
5. Close door.
The time of day will appear on the display.
To Stop Self-Clean any time:
Press OFF/CANCEL, and “cin”, “ON”, "cool” and “LOCKED" will
appear on the display until the oven cools. Then “End” will
appear and the door will unlock.
18