Kenmore ASPIRADORA 116.35623 - Manual (Page 22)

нi ,н j*L': -
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
A
WARNING
Electrical Shock Hazard
Disconnect electrical supply before performing maintenance to the
unit. Failure to do so could result in electrical shock or personal injury.
Vacuum cleaner
w on ’t ru n.
P o or jo b o f d irt
p ick-u p.
■Í
1. Unplugged at wall outlet.
2. Tripped circuit breaker/blown fuse
at househokt service panel.
1. Full or clogged dust bag.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle or bag holder.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8. Hose not inserted fully.
9. Motor protection system activated.
10. Dirty fillers.
1. Change bag.
2. Adjust setting.
3. Replace agitator.
4. Check CLOG REMOVAL
5. Check for clogs.
6. Replace hose.
7. Replace/fix belt.
8. Insert hose fully.
9. Check for clogs.
10
. Change motor safety filter and
exhaust filter.
1. Plug in firmly, select desired setting
on touch control
2. Reset circuit breaker or replace fuse.
V acu um C lean er p icks
u p m o veab le ru gs o r
p ushes too hard .
1. Wrong pile height setting. 1. Adjust setting.
L ig h t w on ’t w o rk. 1. Burned out light bulb. 1. Change light bulb.
A g itato r do es n o t
tu rn .
1. Broken belt.
2. Bare floor selector in bare
floor setting.
3. Belt installed incorrectly.
1. Replace belt.
2. Move selector to the carpet setting.
3. Check BELT REPLACEMENT AND
AGITATOR CLEANING.
A ir flow restricted
w ith attachm en t u se.
S o un d chang es.
1. Attachment use restricts air flow,
2. New carpet fuzz clogged air path.
1. Check ATTACHMENTS.
2. Check CLOG REMOVAL and clean
hose.
E xcessive n o ise as
vacu u m cleaner is shu t
off.
1. Belt rubbing on carpet/bare floor
selector shaft.
1
. Push selector all the way forward.
D irt S en sor, so m e
m o d els, w ill no t w o rk.
1. Dirty optic cells. 1. Clean optic cells.
22