Kenmore ASPIRADORA 116.35623 - Manual (Page 17)

TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, THE AGITATOR MUST BE
CLEANED EVERYTIMETHE BELT IS
CHANGED.
The agitator must be cleaned according to
the following schedule:
Vacuum Use
HEAVY
(used daily)
MODERATE
(used 2-3 times/week)
LIGHT
(used 1 time/week)
Clean Agitator
every week
every month
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area.
Agitator Assembly
Carefully remove the brush end caps and
remove any string or debris located on the
agitator assembly or agitator shaft.
Agnator
TO REPLACE BELT
Make sure that the carpet/bare floor selec­
tor is in the carpet position.
Motor
Shaft
Belt New
Pulley Belt
Carpet/Bare Floor
Selector Shaft
Loop the new belt on the motor shaft.
BELT ROUTING
Correct Routing of Belt
(SelectorIn CarpetPosItlon)
‘ Carpet/Bare
X / ----------- --------_______ [' ^^^°’^Bedat
Agitator / ^otor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
'Sh (Belt on Selector Shaft)
Agitator ^ „otor
Carpet/Bare Floor Shaft
Selector Shaft
Caipet/Bare
f Floor Pedal
Incorrect Routing of Belt
(Selector In Bare Floor Position)
Carpet/Bare
i F /oo r Pedal
Motor Shaft^^ï0) ^ ^
Agitator Carpet/Bare Floor
Selector Shaft
17