beautypg.com

Dirt sensor, Operation, Warning – Kenmore ASPIRADORA 116.35623 User Manual

Page 12: To clean dirt sensor optics

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

DIRT SENSOR

The electronic dirt sensor is a feature

which will detect particles as they pass
through the vacuum cleaner.

The dirt sensor indicator is located on the
front of the switch cover.

The red light indicates dirt is being picked

up by the cleaner.

OPERATION

As you vacuum, the red indicator light wilt
come on and stay on as long as the

sensor detects a high concentration of
particles passing through the vacuum
cleaner.

No tight indicates that most of the
cleaning is complete.

A

WARNING

Electrical Shock And Personal

Injury Hazard

Disconnect electrical supply before
performing maintenance to the

unit. Failure to do so could result in
electrical shock or personal injury
from cleaner suddenly starting.

TO CLEAN DIRT SENSOR OPTICS

The dirt sensor optics consist of two optic
cells located inside the bag holder.
Occasionally, it may become necessary to
clean the two optic cells to assure

maximum performance. It is
recommended the optic cells be cleaned:

•When the red light stays on

continuously.

•When dirt or dust adheres to the

optic cells.

•Whenever the dust bag is changed.

To clean the sensor, wipe the optic cells
with a soft, dry cloth. Never use cleaners
or liquids as they can help speed the

recoating of the optic cells and make it
necessary to clean them much sooner

than normal. The dirt sensor area can be

reached by removing the dust cover and

the dust bag.

12

This manual is related to the following products: