Cobra Electronics 2000 - Manual (Page 103)

86
At any place on the trail, while at the  Trail Mode screen G:
1. Press the HERE function button to proceed to the  GPS Data screen H.
2. Press the SAVE function button to proceed to the  Save or Edit Name menu I.
At the  Save or Edit Name menu I:
 The default name can be accepted.
 A user-defined name can be entered.
At the  Save or Edit Name menu I:
1. Press ENTER or the SAVE function button to accept the
default name and return to the  Trail Mode screen G.
At the  Save or Edit Name menu I:
1. Press the CLEAR function button to clear the default name.
2. Enter the name of choice using spell mode and press ENTER or the
SAVE function button.
The name will be saved and the system will return to the  Trail Mode screen G.
Enter a 
user-defined
n a m e
 NOTE
An attempt to enter more
than 50 waypoints will result
in the  Trail Memory is
Full screen 5 rather than
the  Save or Edit Name
menu I when the SAV E
function button is pressed.
5
Accept the

d e fault name
Name the

waypoint
Add waypoints . . . . . . . .

to the trail
22 B Trail Mode 6/15/04 5:40 PM Page 86