Kenmore 41003 - Manual (Page 18)

USING YOUR REFRIGERATOR
Calibrating the Styius Touch Point
The stylus touch point can be calibrated to best meet the
user’s needs. To adjust the stylus touch point on the touch
screen:
1. Press the Settings button on the “Home” screen. The
display will show the adjustable settings on the
screen.
i u“ I
Tap thw
Kfmm
to sav«
ywf
scitting.» or
woit
20
ujccwids la revurt back to origteol s«ising=
Tim
-0
lirrrit
: 28
s-
NOTE: If the screen is not touched within 30 seconds,
the settings will revert back to the existing settings.
2. Press the Touch Screen Correction button. The
display will show pointer instructions and a “+” on the
screen.
3. Using the stylus, lightly press on the center of the “+”
mark. The “+” mark will move on the screen. Repeat
this step 3 until the “+” mark no longer appears.
Carufgfly lap on coniur of Ihu iarg«t.
KepsioT as th-s forger mov«s arourid ih«? scr»«r>.
+
4. To save the new calibration data, touch the screen
within 30 seconds of the last “+” mark. This will save
the new settings and return the screen back to the
“Settings” screen.
Using Home
When the Home button is pressed, the screen displays
the “Home” screen.
1. Press the Home button.
2. Choose the desired function by pressing it on the
“Home” screen.
1. Today: You can manage your daily schedule.
2. Temp Control: You can set the freezer and
refrigerator temperatures. (See page 27.)
3. Water Filter: It shows the current status of the
water filter and dispenser.
4. Photo Album: Save favorite photos and images
to make your own slide show.
5. Message: You can save or check necessary
messages.
6. Settings: Allows you to set the energy saver,
brightness, screen saver, volume control, touch
screen correction, and current time.
7. Task Bar: Indicates the current time.
18