Kenmore 15828 - Manual (Page 7)

4#® 04«
Cycle time or
delay time display Signal tights Cycle pads Option pads
NOTE: PF will show on the display the first time
your dishwasher Is connected to electricity or when
eiectricity returns after prolonged failure. To clear
the display, press the Cancel/Drain pad,
1. The ULTRA WASH™ Soil Removal System is
designed to remove food particles from the wash
and rinse water, You only need to remove large
chunks and bones.
2, Properly load the top rack, bottom rack, and
silverware basket. See pages 13-17,
3. Spin both spray arms with both racks pushed
back into place to make sure nothing prevents
arms from turning freely,
4. Add deteraent. See paae 11.
5. Check the rinse agent dispenser See page 12.
6. Push door firmly when closing and it will
automatically latch.,
7. Run hot water at the sink nearest to the dish­
washer until water Is hot. Turn off water.
(See pages 8-9 for additional cycle and option descriptions.)
Use Normal Wash to wash dishes now;
Press You will see
NORMAL
WASH '
(cycle time)
Use Quick Rinse now if you plan to wash dishes later:
Press
You will see if’vTj
IF-
(cycle time)
Then use Water Miser when you wash prerinsed dishes:
Press You will see
B
(cycle time)