beautypg.com

Üotins ©r pilnteriaiii f@ur dishwasher |e©nt j, Reconnecting your dishwasher, Storing for the summer – Kenmore 15828 User Manual

Page 20: Inergf sawing tips, Oian§irii û©m ©@i©r panel, Customized wood panels, Energy saving tips

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

ÜOTins ©r Pilnteriaiii f@ur dishwasher |e©nt J

6. Reconnect both water Inlet and water outlet to

the water supply valve.

7. Empty the pan and reposition it under the

water pump.

8. Remove the clamp and disconnect the drain

hose from the water pump; drain water
into pan

9. Reconnect drain hose to the water pump,

being sure to position the clamp over the
connection.

iO. Replace the lower access panel.

Reconnecting your dishwasher

1. Remove the 4 screws on the lower access panel

and remove lower access panel,.

Turn on the water supply to dishwasher.
Turn on power supply to dishwasher.

Run dishwasher through a complete cycle and
check for leaks.

5. Repiace lovs/er access panel,

NOTE: If your dishwasher is connected to a

garbage disposal, do not run water into the sink

after winterizing. This could cause water to refill the
drain hose on your dishwasher.

Storing for the summer

Protect your dishwasher during the summer
months by turning off the water supply and power
supply to the dishwasher

Water pump

Inergf sawing tips

You can help save energy if you:

® Wash full loads. Running a haif-filled dishwasher

uses the same amount of electricity and hot water
as a fuity loaded machine.

® Use the Water Miser cycle if dishes are prerinsed.

The cycle uses less hot water and energy than the

Normal Wash cycle.

« Use the No Heat Dry option when you don’t need

a rapid drying cycle. Allow longer drying times
{overnight} Use a rinse agent to improve drying,,

® Use the Water Heat option only when needed. When

this option is off, the dishwasher wili not pause to

heat water to 135“F {57°C) during the main wash.

NOTE: Loads may not wash as weli if the water

i

f

I i jfjw

® Load correctly for best washing results, incorrect

loading may cause poor washing and the need to
rewash all or part of the load.

® Use the delay feature to run your dishwasher

during off-peak hours. Local utiiities recommend
this to avoid heavy usage of energy at certain
times of day.

Oian§irii û©m ©@i©r panel

NOTE: See your Installation Instructions for more
complete information on changing door coior
panels or installing customized wood paneis.

The opposite side of the door panel is a different

color Additional colors are available through Sears
Repair Services {see page 27).

Customized wood panels

Your dishwasher can be customized with wood
paneis, A heavy-duty door spring kit (Part No
4318050) is needed if the upper pane! weighs more
than 4 pounds. The maximum weight for the upper
panel and door is 8 pounds

20

This manual is related to the following products: