Kenmore 15828 - Manual (Page 15)

..
Remove the top rack when you need more space to
load tal! items in the bottom rack.
To remove the top rack:
1. Remove a!l loaded items from top rack.
2. Gently pull out and up on left end cap tab.
3
. Slide end cap up and off of guide rail.
4. Repeat Steps 1 and 2 to remove right
end cap.
5
. Hold top rack with both hands and pull rack
forward until guide wheels are out of guide rail.
To replace the top rack;
1 . Position top rack with the rear guide wheels next
to guide rails.
2. Slide guide wheels of rack into the guide rails.
Push top rack into dishwasher,
3
. Slide end caps into the holes in guide rails. You
will hear the end cap "snap” into place.
Guide rail
I
'-41^
iciii ri li#'
Items with cooked-ort or dried-on food should be
loaded in the bottom rack, with soiled surfaces
facing inward to the spray,
MOTE: The top rack can be removed tf more space
is needed for tall items in the bottom rack. See
“Removing the top rack.”
Do not load glasses, cups, or plastic items in the
bottom rack.
ffl Load plates, soup bowls, etc., between prongs
and facing inward to the spray,
a Overlap edges of plates for large loads.
® Secure heavily soiled cookware face down in
the rack.
Dish load
Spray tower
continued on next page
15