Kenmore 146.1613311 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Grill Head to Cart
□
This step requires two people to lift and position grill head onto cart.
□
Remove the tie wraps securing regulator hose to underside of grill head. Pull hose and igniter
wires out to side of grill head.
□
Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wires
are hanging outside the cart. Open lid and attach head to cart with (4) M6xl3 screws and
M6 compression washers.
I
M6X13 screw Qty: 4 pcs
M6 compression washer Qty: 4 pcs
20
•
16132-40200104
This manual is related to the following products: