Kenmore 721.358205 - Manual (Page 15)

CLEANING EXTERIOR
Unplug power cord from wall outlet. Clean
exterior using a clean, soft cloth that has been
dipped in a solution of mild liquid detergent and
water and wrung dry.
DO NOT drip water in the cleaner.
DO NOT clean tools in dishwasher or clothes
washer. Wash tools in warm soapy water, rinse
and air dry.
DO NOT use tools if they are wet.
REMOVING CLOGS
The hose located on the vacuum cleaner
carries the dirt from the nozzle up to the dust
bin. If the hose should become clogged :
Unplug vacuum. Remove the assembled v/and,
nozzle hose and check them.
Check the base of the hose for clogging as
shown.
Check suction inlet and filters for clogs.
Check
suction inlet.
N ote : Clogged filters can cause suction power to
be low. To clean the filter, refer to FILTERS
CLEANING / CHANGING section.
-15-