Kenmore 721.358205 - Manual (Page 14)

Remove string or hair that may be wrapped
around the agitator.
A
WARNING
B e careful w hen rem oving the
agitator as the belt tension is high.
F ailure to do so could result in
personal injury from the agitator
releasing quickly and snapping aw ay.
TO REPLACE BELT
Seat the left end of agitator into nozzle base.
Loop the new belt on the motor shaft.
Loop the other end of beit onto the belt
pulley on the right end of agitator.
Pull right end of agitator forward and seat it
into nozzie base.
To seat agitator right end, put right end of
agitator into slot in nozzle base as shown.
Press firmiy, checking to see that each end
is completely inserted.
To replace the nozzle cover, foilow the
NOZZLE COVER REMOVAL /
INSTALLATION section.
-14-