Caution, Replacing headlight bulb, Warning – Kenmore 721.358205 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Allow main and screen filter to dry 24 hours
before putting them back. Make sure that the
filters dry completely.
When cleaning the main filter no longer restores
vacuum suction to full power, you need to
TO CHANGE THE EXHAUST FILTER, take it
out of cleaner and replace it with new one.
DO NOT CLEAN WITH WATER OR LIQUID.
This filter can not be cleaned and must be
replaced for proper performance.
A
CAUTION
W et filter can cause perm anent
dam age to cleaner.
E nsure that all filters dry com pletely.
REPLACING HEADLIGHT BULB
Make sure that the cleaner's switch is off and
disconnect the power cord.
Remove two screws and light cover.
Remove the bulb by twisting and pushing it in
slightly; Then pull out.
Replace the bulb by pushing the bulb in.
A
WARNING
P ersonal injury hazard
T o
avoid
personal
injury,
sw itch
off
and disconnect the pow er cord.
-12-