Cadillac SRX 2010 - Manual (Page 224)

Black plate (58,1) Cadillac SRX Owner Manual - 2010
6-58 Infotainment System
Using the Digit Dial Command
1. Press
b
/
g
. The system
responds with a tone. After the
tone say “Hands Free”. The
system responds “Ready”
followed by a tone.
2. Say “Digit Dial”. The system
responds “Digit dial using
, please say the
first digit to dial” followed by
a tone.
3. Say the digits to be dialed one at
a time. The system repeats back
the digit it heard followed by
a tone.
4. Continue entering digits until the
number to be dialed is complete.
After the whole number has
been entered, say “Dial”. The
system responds “OK, Dialing”
and dials the number.
. If an unwanted number is
recognized by the system,
say “Clear” at any time to
clear the last number.
. To hear all of the numbers
recognized by the system,
say “Verify” at any time.
Using the Call Command
1. Press b / g . The system
responds with a tone. After the
tone say “Hands Free”. The
system responds “Ready”
followed by a tone.
2. Say “Call”. The system responds
“Call using .
Please say the name tag”
followed by a tone.
3. Say the name tag of the person
to call.
. If the system recognizes
the name tag it responds
“OK, calling, ”
and dials the number.
. If the system does not
recognize the name tag, it
confirms the name tag
followed by a tone. If the
name tag is correct, say
“Yes”. The system responds
with “OK, calling, tag>” and dials the number.
If the name tag is not
correct, say “No”. The
system will ask for the
name tag again.
Once connected, the person called
will be heard through the audio
speakers.