Batteries for supplementary power – GE 2-9435 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BATTERIES FOR
SUPPLEMENTARY POWER
4 “AA”-size alkaline batteries (not included) provide the increased power required to:
• Maintain Speaker Phone volume level for the simultaneous use of the Speaker
Phone and an extension phone in another room.
• Provide the required supplementary power needed for Speaker Phone use
under certain line conditions.
• Provides power for Line 1 and Line 2 In-Use Indicator LED’s.
• Provides power for AUTO BUSY REDIAL feature.
1. If telephone is wall mounted, remove from
mounting.
2. UNPLUG Modular jack from phone wall
outlet.
3.
Remove Wall/Desk Adapter to expose
battery compartment.
4. To remove cover, place a coin or screw
driver blade behind battery cover tabs at
top and twist slightly to pop open.
5. Remove cover.
6. Install 4 “AA”-size batteries as indicated on
the battery diagram.
7. To replace cover, place small tabs at bottom
center of each cover inside battery com
partment. Swing coyer and snap in place.
8. PLUG phone into Modular phone
outlet.
Be sure to replace the batteries periodically to maintain full performance of
your Speakerphone. Also, worn out batteries may leak chemicals which can
damage the cabinet and circuitry of your telephone.
22