GE 2-9435 - Manual (Page 17)

PAUSE FUNCTION
Used for storing a momentary delay in the dialing sequence of a stored telephone
number. This is generally used when a “PAUSE” is needed to wait for a dial tone
(e.g. after dialing 9 for an outside line) or a computer tone (e.g. for some long
distance services).
At point where pause is required..................
PRESS PAUSE
(See Programmable Pause______ Page 16)
NOTE: When storing PAUSE in MEMORY, each pause counts as one stored digit.
CHAIN DIALING
Allows you to dial in succession a chain of numbers in different memory locations.
This is handy when you must dial more than one number in memory to complete
a call, such as with frequent calls via an independent long distance service. (e.g.
MCI or SPRINT).
Memory
Location
For Example:
Local Access Number of Long Distance Service and
two (or three) Pauses at end.........................................................is in
7
Authorization Code (ID Number)...................................................... is in
Long Distance Phone Number you wish to call............................. is in
9
To Initiate Chain Dialing:
1. PICK-UP HANDSET or PRESS SPEAKER
2. PRESS O 7
MEMORY
LOCATION
8
9
MEMORY
LOCATION
Dials # in Dials # in Dials # in
Memory Location 7 Memory Location 8 Memory Location 9
18