Automatic” busy redial, Mic mute, Automatic busy redial – GE 2-9435 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
‘AUTOMATIC” BUSY REDIAL
If phone number dialed is busy, your telephone will automatically redial the number
every 30 seconds up to 10 times.
When you receive a busy signal:
1.
PRESS
BUSY
REDIAL
2. Hang-up Handset. SPEAKEI^ operation automatically disconnects.
• LED will flash between Redial attempts.
3. When ring-through is accomplished, you will hear other party’s telephone
ring.
4.
Press SPEAKEI^ button or pick up Handset.
Busy redial is cancelled
w h e n . . .
1 . You PRESS
BUSY
REDIAL
again.
2. Number is still busy after 10 tries. (LED will go out.)
3. You pick up Handset or PRESS | SPEAKER | to place call or answer
incoming call.
4. The line stops being busy and either rings or is answered.
(NOTE: Phone automatically switches to | SPEAKER | phone mode under most
conditions.
MIC MUTE
Deactivates microphones (both Handset and Speaker Phone) so you can converse
at your location and not be overheard by party on the line (you will still hear them).
To use:
_______
1.
PRESS MUTE I to deactivate microphone.
2.
PRESS MUTE {again to continue conversation.
NOTE: Switching from Handset to Speaker phone and vice versa, also
MUTE I.
13
releases