Telephone line cord wrap, Telephone outlet requirements – GE 2-9435 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6. Connect white straight telephone line cord

to wall phone outlet.

7. Slip Adapter mounting holes over wall plate

posts © and slide telephone down ©

so Adapter/Base assembly is firmly in place.

8. Return Handset to base.

TELEPHONE LINE CORD WRAP

This telephone is equipped with a Cord Wrap
for the white straight telephone line cord. The

Cord Wrap is located on the bottom of the

Base. To get to it, remove Wall/Desk Adapter

according to previous section. Wrap excess
cord around Cord Wrap. Reconnect Wall/Desk

Adapter to base according to desired mounting
configuration (Wall or Desk).

TELEPHONE OUTLET

REQUIREMENTS

A modular USOC: RJ11C or 2-line RJ14C

outlet jack (example illustrated) is required.

Installation of this telephone in locations with

4-prong jacks or with hard-wired outlets will
require additional Converters (not included).

The dealer from whom you purchased your
phone or a telephone supply store can advise
you regarding the proper Converter.