Casio XJS38 - Manual (Page 56)

56
To restore all settings on the YC Camera application setup menu to their
initial factory defaults
1 Press the [MENU] key to display the setup menu.
2 Press the [
T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3 Press the [
T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the YC Camera application setup menu.
4 Press the [
T] key to move the highlighting to “Initialize YC Camera Setup” and
then press the [ENTER] key.
z This displays the dialog box shown below.
5 Use the [ S] key to select “Yes”.
6 To restore all the settings to their initial defaults, press the [ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
7 After you are finished, press the [ESC] key to exit the setup menu.