Top rack loading, Proper loading – Whirlpool DP3000XR Series User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Proper loading
Always load dishes so soiled surfaces are reached by spray from rotating spray arms.
Water must be able to drain off completely for best drying results. Be careful fo separate
items so spray can reach all surfaces.
Top rack loading
CUP AND GLASS LOAD
The top rack is designed for cups, glasses
and smaller items.
• Place so open ends face down for clean
ing and draining.
• Load glasses in top rack only.
Bottom
rack is not designed forglasses. Damage
may occur.
• Place items in the rows
between
prongs.
Placing them
over
the prongs can lead
to breakage.
• Be sure lightweight items are held firmly
in place.
• China, crystal and other delicate items
must not touch each other during dish
washer operation. Damage may occur.
MIXED LOAD
• Load plastic items
only in the top rack.
Only plastic items marked "dishwasher
safe” are recommended.
• Plastic items can be melted in the bottom
rack.
• Small bowls, pans and other utensils can
be placed in the top rack.
• Items with cooked-on or dried-on foods should be loaded in the bottom rack with
soiled surfaces facing the spray.