Using the dry only cycle – Whirlpool 3PACH21DD0 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To modify the temperature:

• Press the WARMER Button to raise the

temperature of the room.

• Press the COOLER Button to lower the

temperature of the room.

NOTE:

Each press alters the temperature

approximately 1°C.

To deactivate the HEAT ONLY Cycle:

You can deactivate the HEAT ONLY Cycle

two ways:

• Press the OFF Button.

• Activate another cycle

(for example: AUTO COOL).

Using the DRY ONLY Cycle

The DRY ONLY Cycle allows your air
conditioner to operate as a dehumidifier. It

removes excess moisture from the room air

without providing much cooling. The cycle is
preset to operate most efficiently at LOW fan
speed.

To activate the DRY ONLY Cycle:

• Press the DRY ONLY Button.

NOTE:

When the cycle is active, the

indicator light on the DRY ONLY Button
will be lit.

To modify the fan speed:

• Press the FAN SPEED Button.

NOTE:

Each press advances the fan

speed:

LOW ^ HI MED LOW

To deactivate the DRY ONLY Cycle:

You can deactivate the DRY ONLY Cycle
two ways:

• Press the OFF Button.

• Activate another cycle

(for example: AUTO COOL).

/--------------------------\

FAN SPEED