Installation procedure, Installing your air conditioner – Whirlpool 3PACH21DD0 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING YOUR AIR CONDITIONER

Installation procedure

1. Remove the front panel. Remove tape (if

4. Slide the chassis out of the cabinet,

any). Lift panel and take it off the cabinet.

2. Remove the shipping brackets (2).

Remove the cabinet ground screw (1)
and disconnect the green and yellow
grounding wire.

5. Install the drain plug and drain cup

(accessory parts) to rear of cabinet. Slide
drain cup down into rear support between

grooves in cup.

NOTE: Attach drain plug and drain cup

assemblies and attach hose before
sliding unit into cabinet.

3. Remove the rear shipping screws (2).

6. Fix the cabinet to the support frame.