Personalizing the front panel, Removing the protective covers, Replacing the protective covers – Whirlpool 3PACH21DD0 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PERSONAttZING THE FRONT PANEL

Personalizing the
Front Panel

(available on select models)

The appearance of the front panel can be customized to suit your tastes or to match the

room. The panel has two clear, protective plastic covers that you can remove. Then, place

wallpaper, fabric, pictures, etc., in the open areas and replace the protective covers.

Removing the protective covers

1. Place the flat edge of a screwdriver into

the 1 mm gap between the protective

cover and the front panel.

2. Carefully pry off the protective cover.

3. Repeat for second protective cover.

Replacing the protective covers

1. Insert tabs on one side of the protective

cover into the tabs in the corresponding
side of the front panel.

2. Snap the other side of the cover into

place.

3. Repeat for second protective cover.