Whirlpool 3PACH21DD0 - Manual (Page 8)

OPERATING YOUR AIR CONDITI ONER
Turning the unit off
To turn the unit off, simply press the OFF
Button. This stops any currently-operating
cycle and the unit completely shuts off.
NOTE: When turning unit off from the AUTO
COOL Cycle, the air conditioner remembers
any changes you made during the AUTO
COOL Cycle and adjusts the cycle the next
time you operate it.
IMPORTANT: After turning the unit off,
wait approximately 3 minutes before
turning it back on. If you don’t wait
3 minutes, the air conditioner will try to
start, but turn itself off until the compres­
sor is ready to start again.
OFF ^
0 ,
Using the HEAT ONLY Cycle
The HEAT ONLY Cycle allows your air
conditioner to operate as a heater.
NOTE: Your air conditioner might turn off or
not provide heating if the outside tempera­
ture is too low. This is normal and the unit
will start to operate again after the outside
temperature rises. The HEAT ONLY light
might flash; press the HEAT ONLY button
again to restore operation.
The automatic defrost cycle will turn off the
fan, temperature indicators, and air swing for
several minutes to de-ice the coils so that the
unit can operate efficiently.
To activate the HEAT ONLY Cycle:
• Press the HEAT ONLY Button.
NOTE: When the cycle is active, the
indicator light on the HEAT ONLY Button
will be lit. When you first press the HEAT
ONLY Button, the automatic defrost cycle
might turn on.
To modify the fan speed:
• Press the FAN SPEED Button while the fan
is running.
NOTE: Each press advances the fan
speed:
LOW HI MED LOW
-----------
HEAT
ONLY*
^
FAN SPEED