Whirlpool FES310B - Manual (Page 23)

U S I N G T H E S E L F - C L E A N I N G C Y C L E
4. Push in and turn the Stop Time Knob
clockwise 2 or 3 hours, liie OVEN
HEATING Indicator Light will come on.
• Use 2 hours for light soil.
• Use 3 hours or more for moderate to
heavy soil.
NOTE: Make sure the Start Time Knob is
not pushed in.
5. After the Self-Cleaning cycle is com­
pleted and the oven has cooled
enough,
the Lock Lever can be moved
back to the left. DO NOT FORCE IT. Wait
until it moves easily. Turn the Oven
Selector and Oven Temperature Control
Knob to OFF.
6. After the oven is cool, wipe off any
residue or ash with a damp cloth. If
needed, touch up spots with a soapy
steel-wool pad.
To stop the Self-Cleaning
cycle at any time:
1. Push in and turn the Stop Time Knob
clockwise until it points to the correct
time of day.
2. Turn the Oven Selector and Oven Tem­
perature Control Knob to OFF. When the
oven has cooled enough,
move the Lock
Lever back to the left. DO NOT FORCE
IT. Wait until it moves easily.
Special tips
• Keep the kitchen well ventilated during the
Self-Cleaning cycle to help get rid of heat,
odors, and smoke.
• After the oven Is cool, wipe up any resi­
due or ash with a damp cloth or sponge. If
any spots remain, clean with a mild abra­
sive cleanser or cleaning sponge.
• Clean the oven before it gets heavily soiled.
Cleaning a very soiled oven takes longer and
results in more smoke than usual.
• If the Self-Cleaning cycle does not get the
oven as clean as you expected, the cycle
may not have been set long enough or you
may not have prepared the oven properly.
Set the Self-Cleaning cycle longer the next
time and hand-clean areas noted on page 21.
23