Note, C]°e|i, Water filtration system parts – Whirlpool System I User Manual
Page 2: Tools needed for installation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Water Filtration
System Parts
Remove parts from packages.
Check that you have all the parts.
filtration assembly System I (A)
filtration assembly System II (B)
filtration assembly System III (C)
filtration assembly cover (D)
2 mounting screws (E)
'A"
blue tubing (F)
'A"
orange tubing (G)
2-way grey connector with push-in ends (H)
saddle valve assembly (I)
insert (J)
plastic sleeve (K)
brass compression nut (L)
literature package
D
Y
rr^9ini
v_y
w
C]°E|i
NOTE:
Some state and local plumbing codes prohibit the use of saddle-type
valves. The use of saddle-type valves is prohibited in; Alaska,
Delaware, Idaho, Kentucky, Massachusetts, Michigan, Minnesota,
New Hampshire, North Dakota, Ohio, Oregon and South Dakota.
Check your local plumbing codes for details.
Massachusetts CMR 248 strictly prohibits the use of saddle-type
valves. The feed-water connection must conform to applicable
plumbing codes.
Tools Needed
for Installation
Materials Needed for Basement Installation
• step ladder • Additional tubing,
• yv drill bit
Part No. 4319151 available
• safety glasses from your Whirlpool dealer.
Materials Needed for Optional Sink Faucet Installation
Sink faucet. Part No. 4319154, available from your
Whirlpool dealer. Includes: faucet base with blue
tubing attached, assembly hardware, faucet spout,
2-way grey connector with push-in ends, and a
“T” grey connector with push-in ends.
Open This Flap For Installation Overview