To delay start and stop automatically, Method 1-using cook time and start time, J j u – Whirlpool RB260PXY User Manual
Page 21: I l u u, I c rr i ^^¡ri n
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R O V E N
To delay start and stop
automatically
Method 1-Using Cook Time
and Start Time:
1. Position the oven rack(s) properiy and put
food in the oven.
2. Make sure the clock Is set to the correct
time of day. (See “Setting the clock” on
page 10.)
3. Push the Bake pad to enter the Bake mode.
Use the Temp pad(s) to set the desired
temperature. Push
A
to raise the temperature
or
T
to lower the temperature in 5"F incre
ments. Use these pads until the desired
temperature shows in the small display.
After you have set the desired temperature,
the display will show the set temperature and
the time of day. BAKE will light up.
■ | r r r
J J u
r i r i n
I L U U
4. Push the Cook Time pad. “0:00” with the colon
flashing and COOK TIME will show in the
display.
5. Use the Hour and Minute pads to set the
desired cooking time. Push the “up”
(A)
or
“down” (▼) pad(s) until the correct time shows
in the display.
This example shows a desired baking/roasting
time of 30 minutes.
HOUR MINUTE
Push the Delay Start Time pad. The time of
day with the colon flashing will show in the
display and START TIME will light up.
DELAY
START
TIME
:i c rr I ^^¡ri n
-’-Jr’ lUiDU
21