To remove door bins, Changing the control settings, Adjusting the door bins – Whirlpool 3ET22DKXDN00 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the control settings
» Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjust
ments.
• Then adjust the Freezer Control if needed.
If you need to adjust temperatures in the
refrigerator or freezer, use the settings listed
in the chart below as a guide.
CONDITION:
REASON:
RECOMMENDED SETTINGS:
Refrigerator Freezer
Refrigerator
section too warm
• Door opened often
• Large amount of food added
• Room temperature too warm
4
A
Freezer section
too warm
• Door opened often
• Large amount of food added
• Very cold room temperature
(can’t cycle often enough)
3
C
Refrigerator
section too cold
• Controls not set correctly for
your conditions
2
B
Ice not made
fast enough
• Heavy ice usage
• Very cold room temperature
(can’t cycle often enough)
3
c
Both sections
too warm
• Door opened often
• Large amount of food added
• Very warm or very cold room
temperatures
4
B
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Support button