 warning, Electrical shock hazard, To change the refrigerator light – Whirlpool 3ET22DKXDN00 User Manual
Page 16: To change freezer light, Removing the base grille, Changing the light bulbs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the base grille
To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 18.
Condenser
coils
Metal clips
— Defrost pan Base
Support tabs grille
Changing the light bulbs
 WARNING
Electrical Shock Hazard
Before removing a light bulb or remov
ing a light shield for cleaning, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in electri
cal shock.
To change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 60-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change freezer light:
1. Disconnect refrigerator from power supply.
2. Grasp top and bottom of light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25-watt appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
Dulb with one of the same size and shape.
I
15