Installing it properly, Leveling it – Whirlpool 3ET22DKXDN00 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing it properly

1. Allow

'/2

inch (1.25 cm) space on each

side and at the top of the refrigerator for
ease of installation.

2. If the hinge side of the refrigerator is to

be against a wall, you might want to leave
extra space so the door can be opened
wider.

3. The refrigerator can be flush against the

back wall.

Leveling it

Your refrigerator has 2 front leveling screws

- one on the right and one on the left. To

adjust one or both of these, follow the
directions below.

1. Remove base grille. (See page 15.)

2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock

wise.

4. Check with level.
5. Replace base grille. (See page 15.)

screw