To remove the shelf, To remove the freezer floor, To remove ice – Whirlpool 3ET22DKXDN00 User Manual

Page 14: Ddoim, Removing the freezer shelf, Removing the pull-out freezer floor, Using the ice cube trays

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing the freezer shelf

To remove the shelf:

1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.

Removing the pull-out freezer floor

The freezer floor pulls out for easier access
to foods in the back of the freezer and for

easier cleaning.

To remove the freezer floor:

1. Pull floor out about 2.5 cm (1 inch) with

one hand at center front.

2. Lift floor up at rear until hooks release

from cabinet.

3. Pull floor out the rest of the way.

To replace the freezer floor:

1. Position back of floor into freezer opening.

2. Slide floor straight in until hooks drop into

place at rear of cabinet.

Using the ice cube trays

If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer you store cubes, the smaller they get.

To remove ice:

1. Hold tray at both ends.
2. Twist slightly.

DDOim

•V.'.